Velodyne Launches Market’s Highest-Res LiDAR For AVs

Velodyne Labs claims it has produced a LiDAR with the world’s best resolution, longest range, and widest field of view, the result of which will boost the autonomous vehicle and advanced safety market – high accolades indeed! Velodyne’s VLS-128, with 128 laser beams, will replace the HDL-64 LiDAR as the industry standard for high performance.

 

High-resolution LiDAR is critical to navigate autonomous vehicles (AVs) and provide vehicle safety. It is expected that the VLS-128™ will become the new standard for fully autonomous cars and cars equipped with advanced safety features because of the unchallenged quantity of data it produces in real time at top speed.

 

A Velodyne sensor provides real-time 3D images all around the vehicle, far into the distance, producing billions of data points eagerly understood and consumed by a computer. LiDAR is more reliable, based on measurements, and therefore more accurate than a camera based safety system.

 

In September 2017, Velodyne offered sneak previews of the VLS-128™ dense picture to select customers attending the IAA Auto Show in Frankfurt, Germany. An upgrade to the HDL-64, the VLS-128™ offers a richer image with four times the data points and density than the HDL-64. This will enhance the ability for object detection and collision avoidance while traveling highways speeds, by gathering of billions more data points traveling in real time.

 

High-resolution LiDAR is important for object detection and collision avoidance at all speeds, with the highest resolution needed especially when traveling at speeds higher than 30 miles per hour. The faster a vehicle goes, the more data is needed at a faster pace for safety evaluation.

 

Size matters. The VLS-128 is a 70 percent size reduction from the HDL-64, with double the range and four times the resolution. It is the highest performing LiDAR sensor on the market in terms of field of view, range, resolution, and ability to deal with a complex environment. Due to its 905nm technology, it operates in dry climates and wet environments, and is based on mass-produced CMOS semiconductor technologies. It is produced today at Velodyne’s Megafactory in San Jose using a proprietary fully automatic laser alignment and manufacturing system. Future models will also be produced as part of Velodyne’s Tier-1 Automotive Program.

 

For more details, visit Velodyne LiDAR

Read more on