Thermostat Keeps Control Cabs Corrosion Free

The thermostat integrates a switching module to control dc devices in switch cabinets. Heating and cooling devices, filter fans or signal heads can be controlled directly via the internal switching circuit. Temperature measurement is achieved by placing the external sensor freely within the control cabinet. The setting range is 60°C, available in two versions: -10°C to +50°C and 0 to +60 °C. Voltage range is from 20 to 56 Vdc.

 

The switching module of the DCT 010 is available in versions as normally open (NO) contact, i.e., for controlling filter fans and also in versions as normally closed (NC) contact, i.e., for controlling heaters. Additionally, the NC versions offer a secondary switching function that monitors humidity of the ambient air.

SENSORS MIDWEST

Sensors Midwest Hits Rosemont, IL October 16-17!

Sensors Midwest, the industry's largest event focusing on sensors, design, and IIoT in the Midwest region, is scheduled for October 16-17 at the Donald E. Stephens Convention Center in Rosemont, IL. Co-located with STMA, the event draws over 1,000 engineers and engineering professionals that are looking for access to the latest sensor advancements and will provide an opportunity to connect with the area's greatest technology leaders and suppliers.

 

A threshold value of 65% relative humidity is fixed. Other features include a redundant design with MOSFET technology, a lifetime expectancy exceeding 100,000 switching cycles, tool-free connection, and a six-pin push-in terminal supporting cables with cross-sections up to 2.5 mm2.

 

STEGO Inc.

Marietta, GA

888-783-4611

770-984-0858

[email protected]

https://www.stego.de/us/home