SENSORS EXPO: MEMS Process Enables Miniaturized Low-Power Gas Sensor Applications

Micralyne Inc. introduces standard silicon process technologies and process modules for the development and production of gas sensors. These new capabilities expand existing standard MEMS building blocks and provide the designer with miniaturized, low-power gas sensing structures required to address current Gas Sensors market trends.

 

The Gas Sensors market is changing dramatically; driven by new large-volume consumer applications such as smart IoT enabled wearables and regulatory changes related to environmental air quality. Incumbent gas sensing technologies are experiencing new technical challenges such as dramatic size reduction, low power, increased selectivity, detection of different types of gases, and wide operating temperatures.

EMBEDDED TECHNOLOGIES EXPO & CONFERENCE

The inaugural event will take place June 25-27 in San Jose, CA!

Embedded Technologies Expo & Conference (ETC), in the largest embedded and IoT market in North America, is the ONLY event focused on what is most important to designers and implementers – education and training. Attendees will experience over 100 hours of unparalleled education and training covering embedded systems, IoT, connectivity, edge computing, AI, machine learning, and more. Co-located with Sensors Expo & Conference, attendees will have the opportunity to see hundreds of leading exhibitors and network with thousands of industry peers and innovators.

 

Micralyne started providing standard processes and MEMS building blocks in 2006 with an effort to lower the development costs and accelerate time to market of sensor products.   With the 2012 introduction of MicraGem-Si and subsequent release of MicraSilQ, Micralyne has maintained a focused commitment to enable MEMS process standardization for silicon-on-insulator (SOI) and wafer level packaging (WLP). 

 

Micralyne will be exhibiting at Sensors Expo booth #333, San Jose, California June 27-29, 2017. For more info, visit http://www.micralyne.com

Suggested Articles

Sensors monitor environmental conditions to reduce energy costs, increase building efficiency and improve employee health.

Patented beam-steering technology leverages multiple technologies to improve LiDAR performance, reliability, and cost.

Lightweight instrument brings rapid, real-time, near-infrared material analysis to the field or factory floor.