Quad Power Supply Sequencers Are Rad Hard

Intersil’s ISL70321SEH and ISL73321SEH quad radiation-hardened power supply sequencers drive point-of load (POL) regulators that power high performance FPGAs and complex, multi-rail power systems. Highly scalable, up to four power supplies can be fully sequenced by a single device or multiple devices can be easily cascaded to sequence an unlimited number of power supplies. They are said to be the industry’s first space-grade sequencers backed by single event effects (SEE) mitigation tests and complete radiation assurance testing.

 

The ISL70321SEH sequencer is radiation assurance tested to 100krad(Si) at high dose rate and 75krad(Si) at low dose rate, while the ISL73321SEH is assurance tested to 75krad(Si) at low dose rate. Both sequencers provide an accurate and scalable method to achieve the proper power-up and power-down sequencing of DC/DC converters essential to powering FPGAs, DSPs, RF communications ICs, and high density distributed power systems. They simplify design by using minimal external components, only requiring two resistors per power supply for voltage monitoring, and a single resistor to program the rising and falling delay.

SENSORS MIDWEST

Sensors Midwest Hits Rosemont, IL October 16-17!

Sensors Midwest, the industry's largest event focusing on sensors, design, and IIoT in the Midwest region, is scheduled for October 16-17 at the Donald E. Stephens Convention Center in Rosemont, IL. Co-located with STMA, the event draws over 1,000 engineers and engineering professionals that are looking for access to the latest sensor advancements and will provide an opportunity to connect with the area's greatest technology leaders and suppliers.

 

Both devices integrate precision input comparators with an input threshold voltage of 600 mV ±1.5% and actively monitor seven different fault conditions to provide comprehensive fault detection. A DONE indicator gives system feedback that power-up and power-down have completed successfully.

 

The ISL70321SEH and ISL73321SEH are available now in an 18-lead 10 mm x 12 mm CDFP or in die form. For more information and datasheets are available for the ISL70321SEH and ISL73321SEH.

 

Intersil Corp.

Milpitas, CA

888-468-3774

408-432-8888

http://www.intersil.com