Heat Flux & Temperature Sensor Is Quite Sensitive

The greenTEG gSKIN XO-Temp is a combined heat-flux and temperature sensor exhibiting an impressive min./avg. sensitivity of 10/20 μV/(W/m2). Thermopiles are highly integrated in the sensor substrate, which reportedly leads to exceptional sensitivity. Water and corrosion proof, the sensor meets protection class IP44 and is protected from water spray from any direction.

 

The gSKIN XO-Temp has an integrated surface temperature sensor with an accuracy of ± 0.1°C and a resolution of 0.01°C. It has a low-noise design and very low energy consumption.

SENSORS MIDWEST

Sensors Midwest Hits Rosemont, IL October 16-17!

Sensors Midwest, the industry's largest event focusing on sensors, design, and IIoT in the Midwest region, is scheduled for October 16-17 at the Donald E. Stephens Convention Center in Rosemont, IL. Co-located with STMA, the event draws over 1,000 engineers and engineering professionals that are looking for access to the latest sensor advancements and will provide an opportunity to connect with the area's greatest technology leaders and suppliers.

 

Digital data transmission is not sensitive to cable length, cable resistance or impedance, and is not influenced by electromagnetic noise. Standard cables can be used for extensions.

 

The component can take heat flux measurements with an accuracy of ±3% and is specially shielded against external factors such as changing ambient temperatures. Other features include:

  • Dimensions: 30 mm x 30 mm x 3.3 mm
  • Heat flux range: -15 kW/m2/+15 kW/m2
  • Calibration accuracy: ± 3%
  • Operating min/max temp: -50°C /+80°C
  • Cable length: 100 cm (extendable) 

greenTEG AG

Zurich, Switzerland

+41 44 632 04 20

[email protected]

http://www.greenTEG.com

[email protected]