Handheld Ethernet Network/Cable Tester Is Industry Ready

IDEAL Networks’ rugged NaviTEK IE copper and fiber troubleshooter promises to simplify the process of testing both cabling and networks in Industrial Ethernet networks that use the PROFINET protocol.  Previously, a laptop with specialist software would be required to identify and test network nodes and configuration, which could prove cumbersome in these typically ‘desk-free’ environments.

 

The tester offers all the same features as the company’s NaviTEK NT Pro, but with a range of additional tools specific to the needs of Industrial Ethernet, where packet delivery time is critical for operation. For instance, the system health check feature on NaviTEK IE enables frontline technicians to pinpoint potential issues before they become network failures.  With an easy-to-understand traffic light system, the health check provides a quick indication of how each device is performing. Clicking on each device provides further details of the issues discovered so corrective actions can be taken.

FREE SENSORS NEWSLETTER

Like this story? Subscribe to Sensors Online!

Sensors delivers a suite of newsletters, each serving as an information resource to help engineers and engineering professionals make efficient design and business decisions. Sign up to get news and updates delivered to your inbox and read on the go.

 

Cable faults are another common cause of network downtime. Wiremap tools on NaviTEK IE allow users to automatically discover cable, network, or device configuration, or faults, at the touch of a button.  The tester uses Time Domain Reflectometry (TDR) to provide accurate distance to fault data, testing every wire in the data cable, not every pair, to help isolate issues that other testers cannot find and can be customized to support standard and non-standard cabling configurations. 

 

For copper cabling, using the RJ45 or M12 interfaces included with the NaviTEK IE kit, the tester displays the correct wiring colors for the protocol used, measures the cable length and determines where and what the cable fault is, including split pairs, opens, shorts, and miswires. Those testing fiber data cabling can use an optional SFP module to test different wavelengths, measure the optical RX power received and discover cable faults such as dirty connectors, breaks or bends that exceed specification limits.

 

 

Additional troubleshooting features include quick and easy discovery of incorrect device names, duplicate IP addresses, network latency issues and packet loss, and the ability to display and validate network node details quickly. An event log feature also helps to find intermittent issues by recording all network errors over a 48-hour period to determine whether the issue lies with the cabling, node, PLC, or network configuration.

 

The NETMAP comparison tool can also perform a scan of the entire network to identify all active devices and save this for comparison to future NETMAPS. This enables easy identification of new or removed network devices, incorrectly configured devices or configuration changes, such as those caused by automatic firmware updates. With the device blink feature, hidden or poorly labelled devices can also be found, even in incorrectly labelled networks, by using the NaviTEK IE to flash a specific device LED.

 

To prove the network has been commissioned successfully, NaviTEK IE also provides professional PDF or CSV reports that can be customized and shared with colleagues and clients using the free IDEAL AnyWare mobile app. For more information, checkout the NaviTEK IE data page and visit IDEAL Networks.

Read more on

Suggested Articles

Card features high-speed SerDes input, Power-over-Coax, and on-board FPGA.

Linear position sensor targets industrial or commercial applications.

RJ-45s suit up for industrial chores.