Gas Measurement Module Can Take The Heat

Electro Optical Components’ latest gas measurement module can operate at temperatures up to +190°C.  The module is based on the non-dispersive infrared (NDIR) principle.  The module employs special infrared components such as a two-channel thermopile detector containing two thermopile chips with IR narrow bandpass filters, one for CO2 (or other gases) and one for the reference channel.

The module’s measurement chamber (in the hot environment) is connected to external electronics mounted away from the heat. The gas being measured fills the measurement chamber. Infrared radiation from the source passes through the gas and generates a signal voltage in the thermopile infrared detector. One channel of detector has a narrow band filter with the passband that is the same as the wavelength absorbed by the gas to be detected. The presence of the target gas inside the chamber causes a drop of the output signal of the detector.  This drop is directly related to the gas concentration present, so you can determine gas concentration.

For more details, visit Electro Optical Components, call 855-362-6300 or 707-568-1642, and/or email [email protected].

SENSORS EXPO & CONFERENCE

Sensors 2019 Hits Silicon Valley June 25-27!

Join 7,000+ engineers this June in San Jose at the sensor industry’s biggest event! With 65+ Technical Sessions, 100+ Leading Speakers, 10 new and updated tracks, and 300+ Interactive Exhibits, there’s more opportunity than ever to connect with this booming industry and the technologies driving it. See thousands of the newest technologies in action, learn about the latest applications, and develop invaluable partnerships at the only event dedicated to sensors, connectivity, and systems.
Read more on

Suggested Articles

A unique power- and data-efficient system architecture for the always-on era.

When it comes to energy harvesting, there are two main misperceptions.

The top 50 persons making the sensors world innovate, progress, and maintain a modicum of sanity.