DPMs Are Dense, Efficient And Encapsulated

Renesas Electronics’ two fully-encapsulated digital DC/DC PMBus power modules reportedly deliver the highest power density and efficiency in their class. The dual ISL8274M operates from a 5V or 12V power rail, provides two 30A outputs and up to 95.5 percent peak efficiency in a compact 18mm x 23mm2 footprint. The new ZL9024M operates from a 3.3V rail and outputs 33A of power in a 17mm x19mm2 footprint. They deliver point-of-load (POL) conversions for advanced FPGAs, DSPs, ASICs and memory used in servers, telecom, Datacom, optical networking and storage equipment. Both devices are easy-to-use, PMBus-configurable power supplies that include a controller, MOSFETs, inductor and passives encapsulated inside a module that increases available board space and reduces bill of materials (BOM).

 

The ISL8274M and ZL9024M digital power modules leverage Renesas’ patented ChargeMode control architecture, which provides the highest efficiencies with better than 90 percent on most conversions. The power modules also provide a single clock cycle fast transient response to output current load steps common in FPGAs and DSPs that process power bursts. Their compensation-free design keeps the modules stable regardless of output capacitor changes due to temperature, variation or aging. Eliminating the need for an external discrete compensation network also saves board space and additional BOM cost. The ISL8274M supports input voltages from 4.5V to 14V, while the ZL9024M accepts input voltages from 2.75V to 4V. Both modules offer adjustable output voltages as low as 0.6V.

SENSORS EXPO & CONFERENCE

Sensors 2018 Hits Silicon Valley June 26-28!

Join thousands of engineers this June in San Jose at the sensor industry’s biggest event! With 65+ Technical Sessions, 100+ Leading Speakers, and 300+ Interactive Exhibits, there’s more opportunity than ever to connect with this booming industry and the technologies driving it. See thousands of the newest technologies in action, learn about the latest applications, including AI, Autonomous Vehicles, IoT, and Medical, and develop invaluable partnerships at the only event dedicated to sensors, connectivity, and systems.

 

 ISL8274M Digital Power Module

  • 30A dual digital switch mode power supply with input voltage range from 4.5V to 14V and programmable Vout from 0.6V to 5V
  • PMBus-enabled solution for full system configuration, telemetry and monitoring of all conversions and operating parameters
  • Programmable Vout, soft-start, soft-stop, sequencing, margining and under-voltage, over-voltage, under-current, over-current, under temperature and over-temperature
  • Monitors Vin, Vout, Iout, temperature, duty cycle, switching frequency, and faults
  • Power good indicator, and ±1.2% Vout accuracy over line, load, and temperature
  • Pin-strap mode using external resistors for standard settings
  • Internal nonvolatile memory saves module configuration parameters and fault logging

 

ZL9024M Digital Power Module

  • 33A digital switch mode power supply with input voltage range from 2.75V to 4V and programmable Vout from 0.6V to 1.5V
  • PMBus-enabled solution for full system configuration, telemetry and monitoring of all conversions and operating parameters
  • Programmable Vout, soft-start, soft-stop, sequencing, margining and under-voltage, over-voltage, under-current, over-current, under temperature and over-temperature
  • Monitors Vin, Vout, Iout, temperature, duty cycle, switching frequency, and faults
  • Power good indicator, and ±1.2% Vout accuracy over line, load, and temperature
  • Pin-strap mode using external resistors for standard settings
  • Internal nonvolatile memory saves module configuration parameters and fault logging
     
    Designers can use Renesas’ PowerCompass tool to identify the right power modules and other parts that match their specific requirements, set up multiple rails to support FPGAs or processors, perform high-level system analysis, and generate custom reference design files. Additionally, the PowerNavigator GUI simplifies digital power module configuration, validation and monitoring of all device parameters and telemetry. The tool makes it easy to change features and functions of a digital power supply without writing a single line of code.
     
    The ISL8274M is available now in a thermally enhanced 18mm x 23mm x 7.5mm HDA package, and is priced at $39 each/1,000. An ISL8274MEVAL1Z evaluation board is available for $150 USD. For more information, a datasheet is available. And the ZL9024M is available now in a thermally enhanced 17mm x 19mm x 3.5mm HDA package, priced at $29 each/1,000 quantities. The ZL9024MEVAL1Z evaluation board is available for $95.