Cortec Introduces CorShield VpCI-386 HP powered by Nano-VpCIApril 25, 2014
The Next Generation Of High Performance Coatings
Water-borne Anticorrosion Coatings have gone through many stages of evolution and improvements in recent years. More stringentenvironmental standards are pushing the creation of water-borne coatings for corrosion protection forward.
Recent innovations from Cortec Corporation’s Laboratory enable us to offer new, novel coatings for multi metal protection. This next generation of high performance water-based acrylic coatings has improved barrier performance and enhanced stability, which provides superior corrosion defense in harsh outdoor, unsheltered applications. CorShield™ VpCI®-386 HP’s unique Nano-VpCI® formulation contains a mixture of non-toxic organic inhibitors and pigments that offer extended coating protection, which strongly competes with heavy metal zinc-rich primers and paints. Cortec’s special combination of additives provides a nanoparticle composite polymer barrier that significantly retards the reaction of metal ionization by ion scavenging and passivation.
Economical, environmental-friendly, and easy to handle CorShield VpCI-386 HP is much more effective than most conventional coatings because the corrosion resistance has been improved
by replacing traditionally used toxic materials with more effective, non-toxic, heavy metal free corrosion inhibitors. This safer to use composition eliminates worker exposure to organic solvents and of fire hazards in confined areas. CorShield™ VpCI®-386 HP provides a fast-drying primer/topcoat film that forms a tough, non-flammable, protective barrier that was developed to protect in both indoor and outdoor conditions. It bonds to metal surfaces, defending against corrosive electrolytes and aggressive environments.
CorShield VpCI®-386 HP is recommended for a variety of applications especially where the uses of toxic materials are of concern. The product is thermally stable when dried from -150°F-350°F (-78°C-180°C) and is UV (ultraviolet) resistant giving optimal outdoor performance without cracking or chipping upon prolonged exposure to sunlight. VpCI-386 HP can be used as a topcoat/primer or used as a topcoat with Cortec® VpCI-374 as a primer.
VpCI-386 HP can be applied by spray, roll, brush, or dip. It dries to touch in 40 minutes at 77°F (25°C) and is fully cured in 7 days at 77°F (25°C). It is available in 5-gallon (19 liter) pails, 55-gallon (208 liter) metal drums, liquid totes, and bulk. Available colors are White, Grey, and Yellow.
• Fast-drying, non-flammable
• UV resistant when dried
• Forms non-flammable, protective barrier
• Optimal outdoor performance
• Clear coating allows visual inspection of metal substrate coatings
For more details, call Cortec at 1-800-426-7832 and/or visit http://www.cortecvci.com
Most Read Articles