Energy Harvesting

Powercast Intros New RF Energy Harvesting Transmitter

October 20, 2010

The TX91501 Powercaster transmitter, receiver combo sends power, data for RF energy harvesting and wireless power systems, wirelessly charging and operating micro-power devices.

PITTSBURGH, PA -- Powercast Corporation, a leader in RF-based wireless power and energy harvesting technology, announced availability of its TX91501 Powercaster Transmitter which uses the 915-MHz ISM band to transmit common radio waves for power and data in commercial, industrial and defense applications. As the power source for Powercast's RF energy-harvesting wireless power solution, the TX91501 broadcasts power and data over 40 ft. to its companion Powerharvester receivers. Embedded into micro-power devices such as wireless sensors, instrumentation and controls, the Powerharvester receivers convert the received RF energy into DC power for battery-free operation or to wirelessly trickle charge batteries. The receivers also output the data broadcast from the TX91501 as well as the received signal strength indication (RSSI).

Initial versions of the TX91501 transmitter will broadcast a unique ID for device authentication or location-tracking applications, while future versions will also transmit data such as timestamps for end-device synchronization and control.

Powercast's TX91501 transmitter is approved by the FCC (Part 15) and Industry Canada. It can be used to broadcast RF energy for both power and data in numerous energy-harvesting applications such as environmental monitoring, building automation, energy management and industrial monitoring.

The RF signal uses Direct Sequence Spread Spectrum (DSSS) modulation for power and Amplitude Shift Keying (ASK) modulation for data. The TX91501 is available in versions with an output of 1 W or 3 W Effective Isotropic Radiated Power (EIRP).

The 6.75 in. H x 6.25 in. W x 1.63 in. D transmitter includes an integrated 8 dBi directional antenna with a 60° beam pattern, and the unit mounts easily on either vertical or horizontal surfaces using one of two DC power jacks (bottom or back) and multiple mounting holes. The TX91501 operates immediately when powered on and requires no user configuration or programming. An internal shut-off mechanism automatically stops transmission when objects come close to the device, and an LED indicates transmission status.

Broadcasted RF energy creates a perpetual power source, unlike potentially unreliable solar, heat or vibration energy sources, to provide power-over-distance, one-to-many charging, and controllable wireless power (continuous, scheduled or on-demand). A wire- and battery-free power source enables zero-maintenance devices which deploy to inaccessible locations, and embeds within sealed devices for use in wet or harsh environments.

The 1 W ($235) and 3 W ($300) versions of theTX91501 Powercaster transmitter are available through Powercast's authorized distributors.

About Powercast
Powercast Corporation is a leading innovator of RF energy harvesting and wireless power technology. Founded in 2003, Powercast's proprietary core technology and related intellectual property pioneered the model for completely untethered electronic devices by transmitting and harvesting common radio waves similar to those in wireless communications. Powercast's technologies eliminate or reduce the need for batteries, extend sensor networks into hard-to-service locations, and enable greater system efficiency in applications such as building automation and energy management.

Add Comment


Sensors 2017 Call for Speakers



Twitter Feed

Find It Fix It Forum

Sensors invites you to join the Findit-Fixit Forum, where you can get answers to your sensing questions—concerning technologies, products, methods, applications, and services--and also offer help to your fellow engineers. The Forum covers all kinds of topics, from the basics to the extraordinary.

Join the discussion!

© Copyright 2016 Questex, LLC. All Rights Reserved. Sensorsmag. Privacy Policy | Terms of Use

If you are having technical difficulties or considerations, please contact the webmaster.