The RM116 from Wahl Instruments Inc., Asheville, NC, is a low-resistance tester for maintenance departments, workshops, and field use. The device has 4 measurement wires and features automatic measurement in noninductive resistance mode, automatic triggering when continuity is established between...More>>

TURCK Inc., Minneapolis, MN, offers its FDN20 high-density DeviceNet I/O stations for IP20 applications. The stations can support up to 32 inputs or 16 dedicated inputs and 16 I/O on a DeviceNet network. FDN20 devices separate the I/O into 3 isolated groups that may be powered by an external source...More>>

The STT280 from Penny + Giles Controls Ltd., Christchurch, U.K., has a ±60° tilt measurement range and provides a 0.5–4.5 VDC output over the full inclination angle. Features include an IP68-sealed housing, current draw of 6.5 mA, a built-in molded cable, no moving parts, and...More>>

PCB Piezotronics Inc., Vibration Div., Depew, NY, offers the Model 3711 MEMS DC steady-state response accelerometer for automotive and off-highway testing. The gas-damped sensor is available with F.S. ranges from 3–200 g with frequency response from DC to 1500 Hz. The 0.85 by 0.85 by 0.45 in....More>>

The Temposonics MT position sensor from MTS Systems Corp., Sensor Div., Cary, NC, is designed to be embedded in welded and tie-rod style cylinders or other space-limited cylinder applications. Measuring range is 50–1500 mm with linearity <0.04% and repeatability <0.005%. Each...More>>

EnOcean, Boston, MA, offers the EVA 120C evaluation kit that lets you design self-powered wireless sensors that don't require batteries or external power. The kit includes one of the company's STM 110C solar-powered sensor transmitter modules and a development board with a PC interface. Each module...More>>

The 3214A Series single-axis cubic accelerometer from Dytran Instruments Inc., Chatsworth, CA, is available in 10 mV/g, 100 mV/g, and 500 mV/g sensitivities with ranges of ±500 g, ±50 g, and ±10 g, respectively. Suited for use in modal analysis, NVH, squeak & rattle, and...More>>

The 9360 noncontacting rotary dual-output Hall effect sensor from BEI Duncan Electronics, Irvine, CA, has an electrical angle of 0°–359.9° with ±0.6% F.S. accuracy at room temperature and ±0.9% F.S. over the entire temperature range. Designed for high-vibration...More>>

The APDS-9007 ambient light sensor from Avago Technologies, San Jose, CA, provides a logarithmic output response over brightness from 3 lux to 70 Klux. Designed to follow the human eye's spectral response curve, the sensor produces reliable readings under diverse lighting conditions and is suited...More>>

The AnadigmFilter1 from Anadigm, Tempe, AZ, is a low-frequency filter that is dynamically programmable from DC to 600 kHz, using a 6th order filter. Based on the company's dpASP dynamically programmable analog signal processor, the device lets you implement low-pass, band-pass, high-pass, or...More>>